Caroline Öhman Mägi
Senior Lecturer/Associate Professor at Institutionen för materialvetenskap; Tillämpad materialvetenskap
- Telephone:
- +46 18 471 72 51
- Mobile phone:
- +46 72 999 91 69
- E-mail:
- caroline.ohman@angstrom.uu.se
- Visiting address:
- Ångströmlaboratoriet, Lägerhyddsvägen 1
- Postal address:
- Box 35
751 03 UPPSALA
More information is available to staff who log in.
Publications
Selection of publications
- Additively manufactured mesh-type titanium structures for cranial implants (2021)
- Impact of Biomimicry in the Design of Osteoinductive Bone Substitutes (2019)
- Effect of copper ion concentration on bacteria and cells (2019)
- Antibacterial investigation of titanium-copper alloys using luminescent Staphylococcus epidermidis in a direct contact test (2019)
- Development of Antibacterial Ti-Cu-x Alloys for Dental Applications (2019)
- Investigation of copper alloying in a TNTZ-Cux alloy (2019)
- Bone Volume Assessment Around Dental Implants After Open Maxillary Sinus Elevation Surgery (2019)
- Fatigue performance of a high-strength, degradable calcium phosphate bone cement (2018)
- Assessment of bone formation in CaP scaffolds – µCT method development (2017)
Recent publications
- Quasi-static and dynamic mechanical properties of a low-modulus bone cement for spinal applications (2023)
- Quantification of Bone Height and Bone Volume Around Dental Implants After Open Maxillary Sinus Elevation Surgery Using CBCT. (2023)
- Formation of Ti2Cu in Ti-Cu Alloys (2022)
- Chondroitin/dermatan sulfate glycosyltransferase genes are essential for craniofacial development (2022)
- Corrosion performance of Ti-Cu alloys targeted for biomedical applications (2022)
All publications
Articles
- Quasi-static and dynamic mechanical properties of a low-modulus bone cement for spinal applications (2023)
- Quantification of Bone Height and Bone Volume Around Dental Implants After Open Maxillary Sinus Elevation Surgery Using CBCT. (2023)
- Formation of Ti2Cu in Ti-Cu Alloys (2022)
- Chondroitin/dermatan sulfate glycosyltransferase genes are essential for craniofacial development (2022)
- Corrosion performance of Ti-Cu alloys targeted for biomedical applications (2022)
- The role of Gdf5 in the development of the zebrafish fin endoskeleton (2022)
- The Role of Gdf5 in the Development of the Zebrafish Fin Endoskeleton (2022)
- A combined experimental and numerical method to estimate the elastic modulus of single trabeculae (2022)
- Additively manufactured mesh-type titanium structures for cranial implants (2021)
- Monetite-based composite cranial implants demonstrate long-term clinical volumetric balance by concomitant bone formation and degradation (2021)
- Propranolol Reduces the Development of Lesions and Rescues Barrier Function in Cerebral Cavernous Malformations (2021)
- Functional properties of low-modulus PMMA bone cements containing linoleic acid (2021)
- Long-term mechanical properties of a novel low-modulus bone cement for the treatment of osteoporotic vertebral compression fractures (2021)
- The broad role of Nkx3.2 in the development of the zebrafish axial skeleton (2021)
- Density and mechanical properties of vertebral trabecular bone-A review (2021)
- The effect of housing environment on bone healing in a critical radius defect in New Zealand White rabbits. (2020)
- The effect of housing environment on bone healing in a critical radius defect in New Zealand White rabbits. (2020)
- Implicit and explicit finite element models predict the mechanical response of calcium phosphate-titanium cranial implants (2020)
- Mechanical behaviour of composite calcium phosphate-titanium cranial implants (2020)
- A biomimetic engineered bone platform for advanced testing of prosthetic implants (2020)
- The effect of two types of resorbable augmentation materials - a cement and an adhesive - on the screw pullout pullout resistance in human trabecular bone (2020)
- Impact of Biomimicry in the Design of Osteoinductive Bone Substitutes (2019)
- Effect of copper ion concentration on bacteria and cells (2019)
- Antibacterial investigation of titanium-copper alloys using luminescent Staphylococcus epidermidis in a direct contact test (2019)
- Development of Antibacterial Ti-Cu-x Alloys for Dental Applications (2019)
- Investigation of copper alloying in a TNTZ-Cux alloy (2019)
- Crack nucleation and propagation in microcrystalline-cellulose based granules subject to uniaxial and triaxial load (2019)
- Bone Volume Assessment Around Dental Implants After Open Maxillary Sinus Elevation Surgery (2019)
- Bone Volume Assessment Around Dental Implants After Open Maxillary Sinus Elevation Surgery (2019)
- Developmental low-dose exposure to bisphenol A induces chronic inflammation, bone marrow fibrosis and reduces bone stiffness in female rat offspring only (2019)
- Cemented injectable multi-phased porous bone grafts for the treatment of femoral head necrosis (2019)
- Fatigue performance of a high-strength, degradable calcium phosphate bone cement (2018)
- Osteogenesis by foamed and 3D-printed nanostructured calcium phosphate scaffolds: Effect of pore architecture (2018)
- Calcium Phosphate Microspheres as a Delivery Vehicle for Tooth-Bleaching Agents (2018)
- Effect of strontium surface-functionalized implants on early and late osseointegration: A histological, spectrometric and tomographic evaluation (2018)
- Compressive fatigue properties of commercially available standard and low-modulus acrylic bone cements intended for vertebroplasty (2018)
- Engineering human bone grafts with new macroporous calcium phosphate cement scaffolds (2018)
- Elastic properties and strain-to-crack-initation of calcium phosphate bone cements (2017)
- Compressive fatigue properties of an acidic calcium phosphate cement—effect of phase composition (2017)
- Osteoinduction by Foamed and 3D-Printed Calcium Phosphate Scaffolds (2017)
- Evolution of brain region volumes during artificial selection for relative brain size (2017)
- Evaluation of bone formation in calcium phosphate scaffolds with μCT-method validation using SEM (2017)
- Excessive dietary intake of vitamin A reduces skull bone thickness in mice (2017)
- Compressive fatigue limit of four types of dental restorative materials (2016)
- Changes in the drug release pattern of fresh and set simvastatin-loaded brushite cement (2016)
- Fabrication of rnacroporous cement scaffolds using PEG particles (2016)
- Evaluation of a porosity measurement method for wet calcium phosphate cements (2015)
- Long-term in vitro degradation of a high-strength brushite cement in water, PBS, and serum solution (2015)
- Improving the Flexural Strength Test of Brushite Cement (2015)
- Wetting and film formation of wheat gluten dispersions applied to wood substrates as particle board adhesives (2015)
- Biomaterial characterisation (2015)
- Enhanced drug delivery of antibiotic-loaded acrylic bone cements using calcium phosphate spheres (2015)
- Development of Macroporous Ceramic Scaffolds for Bone Engineering Applications using Human Induced Pluripotent Stem Cells (2015)
- Porosity prediction of calcium phosphate cements based on chemical composition (2015)
- Iodine-enhanced contrast applicable for microcomputed tomography (2014)
- Robocasting of biomimetic hydroxyapatite scaffolds using self-setting inks (2014)
- Urocortin3-expressing neurons in sensory transmission
- The Broad Role of Nkx3.2 in the Development of the Zebrafish Axial Skeleton
Conferences
- Micro-CT as a tool to study crack initiation and propagation in ceramic bone cements (2018)
- Cellular-Resolution Imaging of Microstructures in Rat Bone using Laboratory Propagation-Based Phase-Contrast X-ray Tomography (2018)
- Evaluation of bioactive cranial implants: preliminary results from volumetric quantifications using computed tomography (CT) (2018)
- Longitudinal assessment of trends in calcium phosphate degradation for cranial implants: preliminary results from two patients (2018)
- Fatigue life of a brushite cement under cyclic compressive loading (2017)
- Nanostructured Calcium Phosphate Scaffolds Trigger Osteoinduction and Osteogenesis (2017)
- Titanium-Copper alloy as an antibacterial biomaterial (2017)
- Long-term degradation of novel multiphasic calcium phosphate cements (2017)
- Assessment of bone formation in CaP scaffolds – µCT method development (2017)
- Quantification of radiological changes around dental implants: (2017)
- Elastic Modulus Of Human Single Trabeculae Estimated by Synchrotron CT Experiments And Numerical Models (2017)
- Compressive strength increase of calcium phosphate bone cements is accompanied by a stiffness increase (2016)
- The influence of porosity on the fatigue properties of brushite cement (2016)
- Long-term degradation of brushite cements in three different liquids (2016)
- Quasi-static compressive strength and compressive fatigue limit of dental cements (2016)
- Novel multiphasic calcium phosphate cements with enhanced degradative properties (2016)
- Characterization of multiphasic calcium phosphate cements with improved degradation rate (2016)
- Micro-computed tomography: a tool to study the fracture behaviour of calcium phosphate cements (2016)
- Quantitative evaluation of bone regeneration in a craniofacial implant using computed tomography images (2016)
- The effect of two fatty acids on the antibacterial properties of calcium phosphate cements (2016)
- Local stiffness measurements in apatite and brushite cements (2015)
- Micro-CT imaging as a tool to study the fracture behaviour of bone cements (2015)
- A non-drying porosity evaluation method for calcium phosphate cements (2014)
- Compressive Fatigue Properties of Acidic Calcium Phosphate Cement (2014)
- Real wet density of bone tissue: Does it depend on tissue type and subject? (2014)
- Calcium phosphate spheres incorporated into PMMA cement for enhanced antibacterial properties (2014)
- Facilitating separation of bone from bonelike materials in micro-computed tomography images (2014)
- In vivo performance of a BP-linked hyaluronan-based hydrogel as carrier of bone morphogenetic protein-2 (2013)
- Prediction of porosity in hydroxyapatite and brushite cements (2013)
- Porosity prediction of calcium phosphate cements (2013)
- Premixed calcium phosphate cement as a carrier of bone morphogenetic protein (2013)
- AN EXPERIMENTAL METHOD TO CHARACTERISE KNEE STABILITY: PRELIMINARY TESTS WITH A PORCINE MODEL (2012)